Point of Leak Detection
Explorador de StreamLabs
Imagina la comodidad de saber que tu hogar está seguro, incluso a kilómetros de distancia. El sensor de fugas de agua StreamLabs Scout te ofrece esa tranquilidad: protege constantemente contra fugas inesperadas y monitorea los cambios bruscos de temperatura y humedad que podrían causar problemas. Escucha el pitido tranquilizador si algo sale mal o recibe notificaciones instantáneas en tu teléfono por wifi para tener siempre el control. Miles de personas confían en StreamLabs para proteger sus hogares de daños costosos, combinando tecnología de vanguardia con una comodidad sin esfuerzo. Combina varios Scouts con un control StreamLabs para un apagado automático a la primera señal de peligro o conéctalos a un monitor para una protección completa, incluso en lugares de difícil acceso. ¡No dejes que las fugas ocultas o las heladas repentinas te pillen desprevenido! Experimenta la protección inteligente hoy mismo. Mantente cómodo, seguro y un paso adelante: elige StreamLabs Scout y protege tu santuario ahora.
Pairs Well With
Pairs well with
Place Anywhere
Instant Leak Alerts
DIY Setup
Add-On Coverage
Explorador de StreamLabs
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible.
-
FAQ’s
Looking for more information about StreamLabs Scout, check out our FAQs page.
-
Where do I put my StreamLabs Scout?
We suggest placing is in places where leaks are most likely to happen:
- Under Kitchen & Bathroom Sinks
- Behind Toilets
- Near Open Water Pipes
- Near Water Heaters
- Under or Behind Appliances
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Tech Specs
Included in the Box
StreamLabs Control
Power Supply
Installation Guide
Tech Spec
Radio
- Frequency Band: 2.4GHz
- Protocol: Wi-Fi b/g/n
- Antenna: Internal
Power
- Battery: Included
- Battery Type: 1 x CR123A
- User Replaceable: Yes
- Battery Life: 15 – 18 months depending on use
- Line Power: 3.3V Power Supply (optional)
Physical Description
- Physical Dimensions (LxWxH): 2.76” x 2.95” x 0.95” (70mm x 75mm x 24mm)
- Physical Weight: 85g
- Enclosure Type: ABS Plastic, indoor rated
- Color: Black
Environmental
- Operating Temperature: 0° to +60°C
- Operating Humidity: 10% - 90% (non-condensing)
- Storage Temperature: -40° to +70°C
Certifications
- Compliance: FCC/IC
- Warranty: 1-Year / www.streamlabswater.com/legal/warranty
FAQs
Please read our FAQs page to find out more.
Can I install the Scout outdoors?
- The Scout is designed for indoor use. It can be installed in crawlspaces, garages, sheds, and outdoor enclosures, or in a location where it is shielded from precipitation, condensation, or direct sunlight.
- The Scout should not be installed outdoors or in a location where it is exposed to precipitation, condensation, or direct sunlight.
How can I maximize chances of detecting a leak?
- In order to detect water, the Scout must be placed in a position where it is likely to come in contact with water from leaks.
- Place the Scout in low points that water is likely to drain toward
- Do NOT place the Scout in elevated locations unless it is being used in conjunction with an optional Rope Sensor or Point Of Leak Sensor
- Extend Rope Sensors to maximize the area of leak detection under or around sinks, appliances, or fixtures
- Place and secure Point Of Leak Sensors at a low point in close proximity to the appliance or fixture being monitored
For Plumbing Leaks
We recommend placing the Scout near appliances and fixtures that may experience plumbing leaks, including:
- water heaters, washing machines, icemakers, dishwashers, under sinks, near water softeners and filters, and bathrooms.
- if you have a StreamLabs Control installed in the same Location in your StreamLabs App, leaks detected by the Scout will automatically alert the Control to shut off water.
For non-Plumbing Leaks
We recommended placing the Scout near systems and in areas that may be prone to non-plumbing leaks, including:
- Air conditioning condensate pans, near sump pumps, below-grade pump-outs, near lower lever exterior entries that may see weather-related flooding
- In these cases, if you have a StreamLabs Control installed in the same Location in your StreamLabs App, you can disable auto-shutoff of the Control by going to Alert Settings for the Scout.
For Freeze Alerts
We recommend placing the Scout in areas where exposed pipes may be subject to occasional freezing temperatures, including:
- attics
- garages
- crawl spaces
Can I use the StreamLabs Scout with my StreamLabs Control or StreamLabs Monitor?
- Yes! The StreamLabs Scout can be used by itself by creating a new Location in the StreamLabs App, or it can be added to an existing location in your StreamLabs App account that has either a Control or a Monitor
- When added to a Location in the App with a StreamLabs Control, the Scout is configured out-of-the-box to automatically trigger the Control to close the valve when water is detected
How many Scouts can I use with my App?
- You can add up to 5 Scouts to a Location in two different locations in the free version of the StreamLabs app. This is in addition to having either 1 Control or 1 Monitor in those locations.
- With the StreamPlus App subscription, you can add up to 10 Scouts per Location, with up to 5 Locations (in addition to Monitors or Controls in those Locations).
How do I configure my Scout to cause my Control to automatically close?
- When added to a Location in the App with a StreamLabs Control, the Scout is configured out-of-the-box to automatically trigger the Control to close the valve when water is detected
- Alerts and auto-shutoff settings can be easily adjusted in the StreamLabs App
- NOTE: The Scout MUST be added to the same location as your Control in order to automatically cause the Control to close the valve